Oil Filter R+F FilterElements GmbH OEM Replacements

Oil Filter Elements

We offer a whole range of oil filter elements for the most diverse applications. From the filtration of hydraulic oils, to spin-on filters, to single- double- and automatic filters, we can always make an individual offer. 

If you are interested in the test standards and oil purity, then feel free to take a look at our glossary. We also provide information there about the filter materials and their properties.
Otherwise, please continue reading on this page or send us an enquiry directly. We also have the possibility to exchange many different OEM filter elements. Just write us the OEM name and the item number and we will make you a competitive offer.

Oil Filter Made in Germany

All our filter elements listed here are 100% manufactured in Germany and are subject to the following test standards:

ISO 2941 Collapse and burst pressure test
ISO 2942 Verification of manufacturing quality (bubble point test)
ISO 2943 Test for media compatibility
ISO 3723 End cap load test
ISO 3724 Flow fatigue characteristics
ISO 3968 Flow characteristics
ISO 16889 Filter performance test (multipass test)

Filter material

  • Glass fibre fleece
  • Polyester fleece
  • Filter paper
  • Stainless steel fleece
  • Stainless steel wire mesh

max. Δp* collapse
10 … 25 bar / 145 … 362 PSI

Seal materials
NBR (Buna-N®)
FKM (Viton®)
EPDM

Bypass
1 … 7 bar / 0 … 101 PSI

End caps
Plastic / steel / stainless steel (other end caps on request)

Filter material

  • Glass fibre fleece
  • Polyester fleece
  • Filter paper
  • Stainless steel fleece
  • Stainless steel wire mesh

max. Δp* collapse
10 … 25 bar / 145 … 362 PSI

Seal materials
NBR (Buna-N®)
FKM (Viton®)
EPDM

Bypass
1 … 7 bar / 0 … 101 PSI

End caps
Plastic / steel / stainless steel (other end caps on request)

max. Δp* collapse
5 … 10 bar / 72 … 145 PSI

Seal material
NBR (Buna-N®)

Connections
BSP / UNF / NPT

Filter material
Stainless steel wire mesh

Filter ratings
60, 125, 250 μm

Flow rate
12 – 400 l/min / 3.1 – 104 US GPM

Bypass
0.2 bar / 2.9 PSI

End caps
Aluminium / Plastic

Connections
BSP / NPT

We supply high-quality screw-in and plug-in cartridges in stainless steel or plastic,
suitable for all single, double and automatic filters.

Length
220 mm … 750 mm / 8.66 in … 29.53 in

Diameter
30 mm / 1.18 in

Filter material
Stainless steel wire mesh

Filter ratings
10 … 200 μm (other filter ratings on request)

End caps
stainless steel / plastic

Application
For lubricating oils, fuels, water, chemicals and cooling lubricants

We supply high-quality star, basket and ring strainers in stainless steel design with specially folded filter cloths, which offer a very good filtrate quality and a long service life.
Length
95 mm … 390 mm / 3.74 in … 15.35 in

Diameter
65 mm … 85 mm / 2.56 in … 3.35 in

Filter material
Stainless steel wire mesh

Filter ratings 
10 … 200 μm (other filter ratings on request)
End caps
Stainless steel

Application
For lubricating oils, fuels, water, chemicals and cooling lubricants

Our paper elements are folded in such a way that a maximum filter surface area can be achieved in the smallest possible
and thus a long service life can be achieved. The polyester protection allows safe
safe handling during installation and removal without damaging the pleats.

Length
254 mm, 500 mm or 750 mm / 10.00 in, 19.69 in or 29.53 in
(other lengths on request)

Diameter
124 mm / 4.88 in

Filter material
Paper, glass fibre and polyester (stainless steel wire mesh on request)

Filter ratings
10 μm or 50 μm (other filter ratings on request)

End caps
Galvanised steel or stainless steel

Application
Bypass and flushing filters for automatic filters as well as double filters in the field of lubricating oils.